国产高清视频一区,中文av字幕一区,亚洲男女自偷自拍图片另类,免费看男女www网站入口在线

公司名稱：常州市旺群藥化機械有限公司
會員級別：免費會員

ZP50-11旋轉壓片機用途說明

ZP50-11旋轉壓片機適用于食品、醫藥、化工、電子等其他工業將顆粒狀原料壓制成圓形片/塊/球及環形片、異形片等形狀。不適用于半固體，潮濕顆粒，低溶性、吸濕性原料和無顆粒及細粉末物料的壓制。本機符合GMP標準要求。沖桿與沖釘為組合式，壓制不同形腔的產品只需更換沖釘即可。

Application：

ZP50-11 rotary tablet press is suitable for pressing round/lump/spherical and annular tablets from granule materials. It is widely applied in foodstuff, chemical, electronic industries, etc. It cannot be used to press semi-solid, wet granule, low solubility, hygroscopic or powder materials. This machine meets the GMP requirements. The drill drift and drift pin are built-up type. If you want to change the specification, simply order drift pin of different specification.

ZP50-11旋轉壓片機產品特性

1、ZP50-11旋轉壓片機是單壓式配有11付沖模，沖模安裝在工作臺上（簡稱轉臺）沖桿沿導軌曲線作上下升降運動，經過上下壓輪完成壓片工藝流程所需的動作。

2、ZP50-11旋轉壓片機的壓片工藝流程為連續進行加料、充填、壓片和出片。

3、ZP50-11旋轉壓片機由電機作動力驅動，經三角皮帶傳動減速機，帶動工作轉臺作順時針方向旋轉。

4、4、壓輪裝置采用滾動摩擦，其工作壓力根據壓片要求可在范圍內進行調節。

5、ZP50-11旋轉壓片機工作室采用有機玻璃全封閉開啟門，能見壓片全過程，并能防止壓片時粉塵飛揚。

6、6、壓片厚度及工作壓力均可按手輪指示方向進行調節。

7、7、工作轉臺速度的調節，是通過變頻調速裝置，在電氣操作柜上，用旋鈕進行平穩的調整。

8、8、電器系統與主機為分離式。可保持電器原件潔凈、可靠。

Characteristic

1. 1、The machine is single pressure type installed with 11 sets of punch dies. The punch dies are installed on the working table (simply called as turntable), the punch pole make up and down movement along the rail curve. Pressing process is conducted through the up and down pinch rollers.

2. 2、The technological process for tablet pressing of this machine is material feeding, filling, tablet pressing and tablet out continuously.

3. 3、The machine is motor driven. The turntable rotates clockwise through a triangle belt transmission reducer.

4. 4、The pinch roller device adopts rolling friction. Its working pressure can be adjustment in accordance with the requirement of tablet to be pressed.

5. 5、The working chamber of the machine is totally enclosed by organic glass to prevent dusting during  pressing process. Meanwhile, the whole pressing process can be observed through a door.

6. 6、Thickness pressure and work pressure can be adjusted by the hand wheel indicated direction.

7. 7、The rotation speed of turntable is adjusted by VVVF facility through a knob in electric panel. 

8. 8、In order to keep clean and reliability of electric element, the electric system is separated from the main unit.

ZP50-11旋轉壓片機技術參數

Technical Parameters